|Shanghai Qunjie Machinery Equipment Co., Ltd.|
Shanghai group Jay Machinery Equipment Co., Ltd.
Shanghai Qunjie Machinery Equipment Co., Ltd.
Technical department: 13661534086
Sales one: 15921556613
Sales Department 2: 13524508868
Mr. Chen: 15900972501
Company switchboard: 021-59501335
Address: A-1611, 200 First Road, Baoshan District, Shanghai
What are the significant differences between industrial fans and axial flow industrial heat fans?
1. Working method
The rotation of the industrial fan is based on the principle of axial flow. When it works, the impeller will rotate, then the airflow will enter the impeller according to a certain bearing direction, and then the blades on the fan impeller will produce the surrounding airflow. A certain pressure will gradually convert such air flow into kinetic energy. After flowing into the guide vane, the air flow will be moved along the axial direction, and the gas will be transferred to the duct to increase the pressure and be converted into kinetic energy.
The industrial hot air blower mainly uses the axial flow method to uniformly pass air through the wind tunnel into the internal pipes. After passing through a series of heating equipment such as a heater, the hot air is slowly blown out from the air outlet according to the axial flow method. , To achieve uniform diffusion of hot air.
2. Different wind pressure and volume
Fans and industrial heat fans produce different wind pressures and volumes during operation. Generally, the blades of axial flow heat fans have a fixed position and can rotate around the vertical axis. There will be a certain angle. As the distance between the blades is different, it can be adjusted. The flexible adjustment can change the angle of the blades and the gas, and it can change the wind pressure and air volume. In this way, the hot air can be provided according to the production needs. Industrial fans are different, and are generally constant and immutable unless blades are replaced.
3. Different installation methods
Industrial fans are large in size, so they are more complicated to install and have more installation procedures. Generally, they are located in high spaces, especially the entrance and exit positions of air-conditioning units, the upper orientation of boilers, and draft fans. The size of industrial hot air blower is optional. Generally speaking, it can be used in many production places and workshops, with simple installation and simple maintenance.